How to reduce ring I

 f you have received as a gift or have bought ring of the dream, or have got fine wedding ring, but have suddenly noticed that it to you is big — do not hurry to give ring back. The ring can be reduced — and in this article we will tell you as to make it.

Instruction

1. Carry ring which needs to be reduced, in jewelry workshop. Define, it is how necessary to reduce size rings — depending on it the master will pick up the most suitable way of correction.

2. It is possible to reduce ring, having cut out its part or having squeezed on the special machine. Compression works only at not really wide rings — if your ring is wider than 8 millimeters, it will be required to cut out part of ring and to connect it again, having bent on the special machine and having soldered joint. Roughnesses of joint are well polished and leveled.

3. To determine the ring size, use the special measuring instrument which is in all jewelry stores — put on preparation finger with designation of the different sizes and define what of them suits you. Also it is possible to measure ring by caliper.

4. After determination of the size the master will place ring on torch, will cool and will install in the special device for compression on anvil. After the first compression the ring is taken out and inserted by other party that the size of ring was identical from both edges.

5. After achievement of the necessary result, the ring is transferred to the machine and with use of special roller restore the initial invoice of ring. After that the ring is ground, finishing touches of finishing are carried out.

6. If the ring demands in addition correction of external defects — pomyatost, scratches, distortions of form and similar damages, the ring needs to be placed on adaptation which is called "crossbar" which will correct initial form of ring then the ring needs to be brought to readiness grinding and finishing.